|
APPLICATION INSTRUCTIONS
STICKERS
101
different uses! Perfect for lunch boxes, drinking bottles, shoes, sports
equipment, toys, stationery, books, DVD’s, etc…
To apply:
1. Peel off a sticker and apply to clean, dry surface.
2. For best results allow 24hrs after application before use.
3. An easy solution for labelling shoes.
4. Apply a name sticker and cover with a clear shoe label.
Microwave, steriliser and dishwasher safe. Will stick to most clean, smooth,
dry, hard surfaces.
____________________________________________________________________________________________________________________________
MAGIC IRON ON LABELS
We provide extra labels - please practice on old clothing.
To apply:
1. Pre-heat the iron on cotton setting without steam.
2. Peel off a label & place on garment.
3. Cover with blue application paper and apply your iron for
approximately
10 seconds, pressing FIRMLY over the whole label.
4. Make sure you apply pressure with iron on all the edges and
corners. Heat and pressure bind these labels to the
garments.
5. Check label to ensure all edges are bound. When correctly
applied it should not be possible to easily lift a label
edge. Repeat as needed to ensure the label is firmly applied
and not lifting at any point.
6. For best results allow 24hrs after application before use.
Never put your iron directly on the Magic Iron on
label.
Washing machine and tumble drier safe.
If
your labels are lifting in the wash, iron back down following the instructions
above using a slightly hotter iron.
Ensure synthetic and delicate materials are
protected from the direct heat of the iron with a cloth.
____________________________________________________________________________________________________________________________
IRON ON WOVEN LABELS
A
fabulous choice of fun colours and icons on a modern new woven label, or the
traditional
woven
label; both designed for today’s young Mum who wants an easy option of iron-on
labels!
To
apply:
1. Set your iron to the hottest setting - No steam!
2. Place the label onto a clean dry garment.
3. For best results apply direct to the clothing & NOT to
garment tags.
4. Cover the label with a thin cloth (e.g. handkerchief).
5. FIRMLY press the heated iron onto the cloth for 10-15 seconds.
6. Allow the garment & label to cool to room temperature
& then check that the label is applied firmly along all edges.
7. If necessary apply the iron again for 15-20 seconds.
Do not wash garment for 24hrs after applying the label.
Heat
& pressure bind these labels into clothing. For best results press the
label into the garment without moving the iron.
____________________________________________________________________________________________________________________________
|